Hi Nick, 

Are you able to downgrade the VM spec and retest? 

I was trying AIAB multiple times with same minimal VM requirements but it was failing and crashlooping for postgresql and Mariadb.

After seeing your update was surprised and see if you can bring down system requirements for Testing purpose. 

Thanks
Arun



வியா., 29 ஆக., 2019, AM 1:26க்கு, Nick Chase <nchase@mirantis.com> எழுதியது:
Will do.  I'm seeing how low I can go and have it still work.  Thanks!

----  Nick

On Wed, Aug 28, 2019 at 11:43 AM SKELS, KASPARS <ks3019@att.com> wrote:

Hi Nick, this is great to hear!

 

I would suggest to add documentation patchset to the AIAB readme to state minimal requirements for GCU in the AIAB!

 

Kindly, Kaspars

 

 

From: Nick Chase <nchase@mirantis.com>
Sent: Wednesday, August 28, 2019 7:34 AM
To: Roman Gorshunov <paye600@gmail.com>
Cc: airship-discuss@lists.airshipit.org
Subject: Re: [Airship-discuss] AIAB and default backend - 404

 

I found the problem.  First off, I was citing the wrong repo.  I actually was coming from https://opendev.org/airship/treasuremap/

 

Second, apparently the requirements cited for the machine are too small.  The README says 4vCPU/20GB RAM/32GB but with that I was in a periodic crashloop for Postgres.  GCE was suggesting I increase the machine to 8vCPU/48GB RAM.  Ultimately I'm at 16vCPU/60GB RAM and about 32GB of drive space is used.

 

With the bigger machine, everything deployed properly and seems to be running smoothly.

 

----  Nick

 

On Tue, Aug 27, 2019 at 9:56 AM Nick Chase <nchase@mirantis.com> wrote:

OK, I feel ridiculous saying this, but I can't find the Ingress.  I get plenty of output from 

 

kubectl get --all-namespaces ing

 

but "no resources" from

 

kubectl get ing

 

----  Nick

 

On Tue, Aug 27, 2019 at 9:51 AM Nick Chase <nchase@mirantis.com> wrote:

I ran the airship-in-a-bottle.sh script from https://opendev.org/airship/airship-in-a-bottle.  Is there another preferred way?  I can try the Vagrantfile.

 

I'll check out the logs.

 

----  Nick

 

On Tue, Aug 27, 2019 at 2:06 AM Roman Gorshunov <paye600@gmail.com> wrote:

Hi Nick,

Which script did you run and from which repo?
I would start with checking logs and config of running ingress.

Best regards,

Roman Gorshunov


> On 26 Aug 2019, at 22:40, Nick Chase <nchase@mirantis.com> wrote:
>
> I'm pleased to say that I've successfully run the script to install Airship in a Bottle -- or at least I think I did.  When I try to access most of the endpoints, I get
>
> default backend - 404
>
> Except for the Horizon endpoint, where I get nothing at all.
>
> I'm assuming this is a K8s issue, but I'm not sure where to look further.
>
> Any ideas?
>
> ----  Nick
> _______________________________________________
> Airship-discuss mailing list
> Airship-discuss@lists.airshipit.org
> http://lists.airshipit.org/cgi-bin/mailman/listinfo/airship-discuss


_______________________________________________
Airship-discuss mailing list
Airship-discuss@lists.airshipit.org
http://lists.airshipit.org/cgi-bin/mailman/listinfo/airship-discuss

_______________________________________________
Airship-discuss mailing list
Airship-discuss@lists.airshipit.org
http://lists.airshipit.org/cgi-bin/mailman/listinfo/airship-discuss