[Airship-discuss] Airship in a bottle install failure...

Mon Jan 7 11:57:26 UTC 2019

Hello all,
I have in-a-bottle deployment running right now for about two hours.
Will let you know if it succeeds (it should).

Best regards,
--
Roman Gorshunov

On Mon, Jan 7, 2019 at 12:52 PM Alex Arnoldy <alex.arnoldy at suse.com> wrote:
>
> Hi Drew,
>
>
>
> Thanks for getting back to me on this. I haven’t had a chance to give this another shot, but I’ll do my best to get to that within the next week or two.
>
>
>
> I’ll definitely let you know how things go.
>
>
>
> Very best,
>
>
>
> --Alex.
>
>
>
> Alex Arnoldy
> Software Defined Infrastructure Solutions Architect
> SUSE
> Alex.Arnoldy at SUSE.com
> (P) +1 (408) 828-9797
>
>
>
> From: Drew Walters <drewwalters96 at gmail.com>
> Sent: Friday, January 4, 2019 7:37 PM
> To: INI-EAI-INO-MBL Balsiger Daniel <Daniel.Balsiger at swisscom.com>
> Cc: MATT MCEUEN <MM9745 at att.com>; airship-discuss at lists.airshipit.org; Alex Arnoldy <alex.arnoldy at suse.com>
> Subject: Re: [Airship-discuss] Airship in a bottle install failure...
>
>
>
> Hi Alex!
>
>
>
> Sorry for the delay. Have you had the opportunity to verify that this issue still persists with the latest version of Airship-in-a-Bottle? There have been several changes since the last time we visited this that may resolve the above.
>
>
>
> Regards,
>
> Drew Walters
>
>
>
> On Tue, Dec 11, 2018 at 9:29 AM Balsiger Daniel, INI-EAI-INO-MBL <Daniel.Balsiger at swisscom.com> wrote:
>
> Hi there everyone
>
>
>
> Thanks for the quick replies, I tried a new install on a fresh VM, behaves the same, problem is persisting:
>
>
>
> I see in Postgresql-0 logs:
>
> --snip
>
> FATAL:  the database system is in recovery mode
> LOG:  database system was not properly shut down; automatic recovery in progress
> LOG:  invalid record length at 0/102A400
> LOG:  redo is not required
> LOG:  MultiXact member wraparound protections are now enabled
> LOG:  database system is ready to accept connections
> LOG:  autovacuum launcher started
> FATAL:  could not open relation mapping file "global/pg_filenode.map": No such file or directory
> LOG:  autovacuum launcher process (PID 79) exited with exit code 1
> LOG:  terminating any other active server processes
> LOG:  all server processes terminated; reinitializing
> LOG:  database system was interrupted; last known up at 2018-12-11 15:25:38 UTC
> LOG:  database system was not properly shut down; automatic recovery in progress
>
> --snip
>
>
>
> and in mariadb-server-0 logs:
>
> --snip
>
> ubuntu at airship:~$ sudo kubectl -n ucp logs mariadb-server-0
> 2018-12-11 15:25:35,704 - OpenStack-Helm Mariadb - INFO - This instance hostname: mariadb-server-0
> 2018-12-11 15:25:36,310 - OpenStack-Helm Mariadb - INFO - Kubernetes API Version: v1.10.2
> 2018-12-11 15:25:36,313 - OpenStack-Helm Mariadb - INFO - Will use "airship-ucp-mariadb-mariadb-state" configmap for cluster state info
> 2018-12-11 15:25:36,313 - OpenStack-Helm Mariadb - INFO - Getting cluster state
> 2018-12-11 15:25:36,348 - OpenStack-Helm Mariadb - INFO - The cluster is currently in "init" state.
> 2018-12-11 15:25:36,348 - OpenStack-Helm Mariadb - INFO - Getting cluster state
> 2018-12-11 15:25:36,455 - OpenStack-Helm Mariadb - INFO - The cluster is currently in "init" state.
> 2018-12-11 15:25:36,456 - OpenStack-Helm Mariadb - INFO - Waiting for cluster to start running
> 2018-12-11 15:25:36,456 - OpenStack-Helm Mariadb - INFO - Getting cluster state
> 2018-12-11 15:25:36,474 - OpenStack-Helm Mariadb - INFO - The cluster is currently in "init" state.
> 2018-12-11 15:25:56,491 - OpenStack-Helm Mariadb - INFO - Getting cluster state
> 2018-12-11 15:25:56,637 - OpenStack-Helm Mariadb - INFO - The cluster is currently in "init" state.
> 2018-12-11 15:26:16,657 - OpenStack-Helm Mariadb - INFO - Getting cluster state
> 2018-12-11 15:26:16,678 - OpenStack-Helm Mariadb - INFO - The cluster is currently in "init" state.
> 2018-12-11 15:26:36,684 - OpenStack-Helm Mariadb - INFO - Getting cluster state
> 2018-12-11 15:26:36,697 - OpenStack-Helm Mariadb - INFO - The cluster is currently in "init" state.
> 2018-12-11 15:26:56,717 - OpenStack-Helm Mariadb - INFO - Getting cluster state
> 2018-12-11 15:26:56,749 - OpenStack-Helm Mariadb - INFO - The cluster is currently in "init" state.
> 2018-12-11 15:27:16,761 - OpenStack-Helm Mariadb - INFO - Getting cluster state
> 2018-12-11 15:27:16,876 - OpenStack-Helm Mariadb - INFO - The cluster is currently in "init" state.
>
> --snip
>
>
>
>
>
> Best Regards, D
>
>
>
> ________________________________
>
> From: Alex Arnoldy <alex.arnoldy at suse.com>
> Sent: Monday, December 10, 2018 7:48 PM
> To: MCEUEN, MATT ; airship-discuss at lists.airshipit.org; Balsiger Daniel, INI-EAI-INO-MBL
> Subject: RE: Airship in a bottle install failure...
>
>
>
> Hi Matt,
>
>
>
> Here is the commit I’m using:
>
>
>
> commit 221441f1bff351ab366b02d6fd7856b70b06108f
>
> Author: Bryan Strassner <bryan.strassner at gmail.com>
>
> Date:   Mon Nov 19 17:12:10 2018 -0600
>
>
>
>     Update apiserver for admission controller
>
>
>
>     Update the apiserver's command prefix to match between the apiserver
>
>     chart and the genesis api server.
>
>
>
>     Includes an optimization of virsh commands to parallelize and wait for
>
>     cloud init to complete (requires Ubuntu 16.04.4)
>
>
>
>     Change-Id: I793d210e15c3c13e8b662bd2459ed8bcba30d434
>
>
>
> I’m happy to start over to see if a new pull resolves the issue, but it happened to me twice in a row so I thought I’d preserve the environment for examination.
>
>
>
> Best,
>
>
>
> --Alex.
>
>
>
> Alex Arnoldy
> Software Defined Infrastructure Solutions Architect
> SUSE
> Alex.Arnoldy at SUSE.com
> (P) +1 (408) 828-9797
>
>
>
> From: MCEUEN, MATT <MM9745 at att.com>
> Sent: Monday, December 10, 2018 9:33 AM
> To: airship-discuss at lists.airshipit.org; Alex Arnoldy <alex.arnoldy at suse.com>; INI-EAI-INO-MBL Balsiger Daniel <Daniel.Balsiger at swisscom.com>
> Subject: RE: Airship in a bottle install failure...
>
>
>
> Weird, the maas-db-init job is running fine for me with a fresh deployment of airship in a bottle.  Alex, are you seeing that “no pg_hba.conf” error current aiab code, or can you give git commit where you’re hitting the issue?
>
>
>
> Daniel, can you please run “sudo kubectl -n ucp logs mariadb-server-0” and share the results?  Looks like MariaDB isn’t starting cleanly for some reason.
>
>
>
> Thanks,
> Matt
>
>
>
> _______________________________________________
> Airship-discuss mailing list
> Airship-discuss at lists.airshipit.org
> http://lists.airshipit.org/cgi-bin/mailman/listinfo/airship-discuss
>
> _______________________________________________
> Airship-discuss mailing list
> Airship-discuss at lists.airshipit.org
> http://lists.airshipit.org/cgi-bin/mailman/listinfo/airship-discuss